Dynamic Routing

From UntangleWiki
Revision as of 20:19, 9 March 2018 by Cblaise (talk | contribs) (Created page with "<span style="display:none" class="helpSource network_dynamicrouting">QoS</span> <span style="display:none" class="helpSource network_advanced_dynamicrouting">QoS</span> == Ab...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

About Dynamic Routing

Dynamic Routing allows for the exchange of routes between other routers using BGP and OSPF protocols. This allows for...

Dynamic Routing settings can be found at Config > Network > Advanced > Dynamic Routing.




Examples

Below are a few examples going from simple to more complex.

  1. Example 1.
  2. Example 2.


Settings

This section reviews the different settings and configuration options available for Dynamic Routing.

  • Dynamic Routing Enabled: Controls whether dynamic routing is enabled or disabled. The default setting is unchecked, which means dynamic routing is disabled. BGP and/or OSPF must also be enabled as well.


  • Status: Overall status of dynamic routing shows:
  • Aquired Dynamic Routes define Aquired Dynamic Routes here.
  • BGP Status define BGP Status here.
  • OSPF Status define OSPF Status here.
Dynamic Routing Status


  • BGP: Enable BGP protocol. BGP requires a lot more maintenance than OSPF but because its an older protocol, has wider adoption.
Dynamic Routing BGP
  • Neighbors define neighbors here.
  • Networks define neighbors here.


  • OSPF: A much simpler protocol.
Dynamic Routing OSPF
  • Networks define neighbors here.
  • Areas define areas here.
  • Interface Overrides define interface overrides here.
  • Advanced Options define advanced options here.


Dynamic Routing FAQs

Dynamic Routing FAQs