Netflow
From Edge Threat Management Wiki - Arista
Jump to navigationJump to search
NetFlow is a feature developed by Cisco which provides the ability to collect IP network traffic information as it enters or exits an interface. By analyzing the data provided by NetFlow, a network administrator can determine the source and destination of traffic, class of service, and the causes of congestion. A typical flow monitoring setup consists of three main components:
- Flow exporter: aggregates packets into flows and exports flow records towards one or more flow collectors. In this case, the NGFW.
- Flow collector: responsible for reception, storage and pre-processing of flow data received from a flow exporter.
- Analysis application: analyzes received flow data in the context of intrusion detection or traffic profiling, for example.
Netflow on NGFW uses softflowd.
Netflow
Netflow settings are located in Config > Network > Advanced > Netflow.
- Netflow enabled
- This enables the sending of netflow data to the specified netflow collector.
- Host
- The IP address or hostname of the netflow collector.
- Port
- The port for the netflow collector.
- Version
- The version of netflow to send. NGFW supports multiple standard versions: v1, v5, and v9.
